![]() ![]() You can use this IC in arithmetic logic units of computer memory. ![]() It has four multiplexers consisting of two input pins. Therefore, if you are looking for more than one 2×1 mux inside a single chip and want to control each mux with a single select line, this is the best choice for you.ħ4HC157 IC is intended for use in multiplexing of data or in communication lines. ![]() Because a common select line controls all muxes. Because it selects from two inputs only.Īlthough it has four mux, but we cannot control each mux individually. For a 2×1 size mux, a one-bit select line is enough. It is also known as a quad multiplexer IC. This Mux IC consists of quad 2×1 multiplexers within a single chip. The size of the select pins depends on the width of the mux. It always has a select pin that selects the input that should appear on the output pin. The maximum propagation delay is 25ns at Vcc = 4.5V.Ī multiplexer is a digital electronics device having two or more input and one output.It is compatible with TTL/CMOS Input Logic.The outputs are directly Interfaced to CMOS, NMOS, and TTL.The input voltage range is 1.35V to 3.15V.Displays outputs in the non-inverted form.Quad multiplexer IC with a voltage range of 2V to 6V.The few main specifications of this IC are: This input is active low and is responsible for enabling or disabling outputs. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |